Your cart is currently empty!
Snap Family: Snap Families to Floors, Roofs and Terrain in Revit
Move many families up or down so each one sits on a floor, ceiling, roof or toposolid, with an optional offset.
Face Section Box: Box Any Element and Look Straight at a Face in Revit
Pick a face: the 3D section box fits the element, aligned to that face, and the view turns to look straight at it.
Parallel Section: Section Along Walls, Beams and Pipes from Your Side
Pick a wall, beam or pipe and a section along it opens, looking at it from the side you were looking from.
Cross Section: Cut a Section Across Beams, Pipes and Ducts in One Click
Pick a beam, pipe, duct or column and a section across it opens at that point, ready to check the model against the scan.
Allow/Disallow Join: Control Beam and Wall End Joins in Revit
Allow or disallow end joins for many beams or walls at once, in the view, a selection, picked elements or the whole project.
Auto Join: Join Revit Elements by Rules and Fix the Join Order
Set which category cuts which, then join all touching elements in a view, a selection or the whole project, and fix wrong join orders.
Purge CAD: Remove Imported and Linked CAD Files from Revit
See every imported and linked CAD file with the view it sits in, tick the ones you no longer need and remove them in one go.
Model Check: Track Revit Model Issues with Your Team
Capture a view, mark up the problem, assign it to a teammate and follow it until it is fixed and verified, all inside Revit.
Fit MEP: Model Pipes, Ducts, Cable Trays and Conduits from a Point Cloud
Click a pipe, duct, cable tray or conduit in the scan and Fit MEP creates it with the fitted size and position.
Fit Structure: Model Beams and Columns from a Point Cloud in Revit
Click a beam or a column in the scan and Fit Structure creates it at the measured size, with a matching type.
